News Home
Latest News
Site News
LSM Technologies- Our Company
Ascorel Load Weighing / Anti- Collision Systems
ARO Pneumatic Pump Units
Cox HD Lubrication Reels
LubeFlo- HD Lubrication Equipment
LSM Breather Technology
Orlaco- Camera Viewing Solutions
Vogel Lubrication Systems
Sy-Klone
Ride-On
Technical Services & Support
News Categories
Applications + Industries + Customers
Product News
Company News
Editorials
Training + Short Courses
Sponsorships + Events + Exhibitions
Job Vacancies
Respa SD (External Air) and SDX (Recirculation Air) mounted on WA500 Roof
RESPA SDX (Recirculation Air) Unit depicting air extraction point
Respa SD (External Air) and SDX (Recirculation Air) mounted on WA500 Roof
Respa SD (External Air) Unit


RESPA HVAC Precleaner + Filtration + Pressuriser- Port Loading- Komatsu SMART approved

[Back]

18-Dec-09
Peter Woodford

Recently Komatsu installed both RESPA SD (External Air) and SDX (Internal Air) units on a WA500 Wheel Loader operating at a Western Australia Port Handling Facility.

Installation of the RESPA SD and SDX was completed by Komatsu under instructions of LSM Technologies for various modifications that were required to ensure optimum, flow rate, filtration, Cabin pressurisation and thermal cooling of the HVAC /Cabin. The configuration has met Komatsu SMART engineering approval as well.

The Operating environment for the Wheel Loader is inside a building housing Copper Sulfate particulate and so the primary objective was to provide maximum protection of the Operator with Filtration of both the External Air and Internal Recirculation Air supply.

Sy- klone specialised MERV+ Filter Elements were installed in both units that provide Hepa grade filtration of 0.3 micron at 99.97% efficiency.

LSM Technologies inspected / commissioned both RESPA PFP (Precleaner +Filtration + Pressuriser) units and found that after approximately 150 hours of operation that:

  • The RESPA SD (External Air) Filter Element was only partially loaded.
  • The RESPA SDX (Recirculation Air) was only slightly loaded.
  • Optimum flow rates at the HVAC Plenum were being maintained (SD= >35 litre / sec and SDX >25 litres/ sec).
  • Expected Filter Element service life is expected to be 1,000 hours for both Filter Elements.

LSM Technologies / Sy- klone RESPA PFP Units are not only the ultimate control measure for reducing Operator exposure to Respirable / Inhalable Particulate, but also provide enormous costs savings in maintenance and associated productive losses with extension of Filter Element and HVAC service life.

See our other features and benefits section on our web site or please contact us at LSM Technologies via email or contact us



Printable PDF
Download this news item as a printable PDF file.


Return to the Latest News page
Visit the LSM Technologies- Our Company web site
Visit the Sy-Klone web site
Return to the LSM Technologies home page